.270 6.86 .234 5.94 .591 15.01 .198 5.03 .127 3.23 ( 1.372 ) 34.85 when assembled marking: kings 2065 + cable code+ date code + location code see note 8 .138 3.51 .748 19.00 .354 8.99 catalog p/n: 2065-e00-3c202n notes: unless otherwise specified 1. for general series specifications, see sdprf-206. 2. material specifications: bayonet sleeve, body, contact, ferrule: brass per astm b16 insulator: teflon per astm d1710 spring washer, outer contact: beryllium copper, astm-b-194 gasket: silicone rubber 3. finish specifications: bayonet sleeve, body, ferrule: .000100min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs) contact: .000030 min. gold per astm b488, over nickel per ams-qq-n-290 (rohs) spring washer: .000200 min silver per qq-s-365 over copper per astm b734 (rohs) all other metal parts: .000050 min nickel per ams-qq-n290 over .000050 min copper per astm b734 (rohs) 4. contact and ferrule shipped loose. 5. for use with tachii cable tcx-3c2v & tcx-3c2vs or equivalent. 6. for crimping use kings kth-5000 & kth-5005 (.232 hex, .054 square flat). 7. assemble to cable using cap-e01. 8. these area don't have white marking. 9. electric specifications: impedance: 75 ohms frequency range: dc to 3 ghz return loss: 25 db min (dc to 3 ghz) recommended cable trimming dimensions a bnc 75 plug for tachii tcx-3c2v(s) (rohs compliant) ctc cy 03/15/10 by date appd revised per ecr-er22654 description b rev xx/xx/xx xxx date approved xx/xx/xx xxx date approved 04/08/09 ctc date approved 04/08/09 cy date drawn customer sales drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 2:1 sht rev of b 1 1 SD2065-E00-3C202N winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf026 b
|
